Skip to main content
Version: 0.14.0

Write Operations

It may be helpful to understand the different write operations of Hudi and how best to leverage them. These operations can be chosen/changed across each commit/deltacommit issued against the table. See the How To docs on Writing Data to see more examples.

Operation Types

UPSERT

This is the default operation where the input records are first tagged as inserts or updates by looking up the index. The records are ultimately written after heuristics are run to determine how best to pack them on storage to optimize for things like file sizing. This operation is recommended for use-cases like database change capture where the input almost certainly contains updates. The target table will never show duplicates.

INSERT

This operation is very similar to upsert in terms of heuristics/file sizing but completely skips the index lookup step. Thus, it can be a lot faster than upserts for use-cases like log de-duplication (in conjunction with options to filter duplicates mentioned below). This is also suitable for use-cases where the table can tolerate duplicates, but just need the transactional writes/incremental pull/storage management capabilities of Hudi.

BULK_INSERT

Both upsert and insert operations keep input records in memory to speed up storage heuristics computations faster (among other things) and thus can be cumbersome for initial loading/bootstrapping a Hudi table at first. Bulk insert provides the same semantics as insert, while implementing a sort-based data writing algorithm, which can scale very well for several hundred TBs of initial load. However, this just does a best-effort job at sizing files vs guaranteeing file sizes like inserts/upserts do.

DELETE

Hudi supports implementing two types of deletes on data stored in Hudi tables, by enabling the user to specify a different record payload implementation.

  • Soft Deletes : Retain the record key and just null out the values for all the other fields. This can be achieved by ensuring the appropriate fields are nullable in the table schema and simply upserting the table after setting these fields to null.
  • Hard Deletes : A stronger form of deletion is to physically remove any trace of the record from the table. This can be achieved in 3 different ways.
    • Using DataSource, set OPERATION_OPT_KEY to DELETE_OPERATION_OPT_VAL. This will remove all the records in the DataSet being submitted.
    • Using DataSource, set PAYLOAD_CLASS_OPT_KEY to "org.apache.hudi.EmptyHoodieRecordPayload". This will remove all the records in the DataSet being submitted.
    • Using DataSource or Hudi Streamer, add a column named _hoodie_is_deleted to DataSet. The value of this column must be set to true for all the records to be deleted and either false or left null for any records which are to be upserted.

BOOTSTRAP

Hudi supports migrating your existing large tables into a Hudi table using the bootstrap operation. There are a couple of ways to approach this. Please refer to bootstrapping page for more details.

INSERT_OVERWRITE

This operation is used to rerwrite the all the partitions that are present in the input. This operation can be faster than upsert for batch ETL jobs, that are recomputing entire target partitions at once (as opposed to incrementally updating the target tables). This is because, we are able to bypass indexing, precombining and other repartitioning steps in the upsert write path completely. This comes in handy if you are doing any backfill or any such type of use-cases.

INSERT_OVERWRITE_TABLE

This operation can be used to overwrite the entire table for whatever reason. The Hudi cleaner will eventually clean up the previous table snapshot's file groups asynchronously based on the configured cleaning policy. This operation is much faster than issuing explicit deletes.

DELETE_PARTITION

In addition to deleting individual records, Hudi supports deleting entire partitions in bulk using this operation. Deletion of specific partitions can be done using the config hoodie.datasource.write.partitions.to.delete.

Configs

Here are thh basic configs relevant to the write operations types mentioned above. Please refer to Write Options for more Spark based configs and Flink options for Flink based configs.

Spark based configs:

Config NameDefaultDescription
hoodie.datasource.write.operationupsert (Optional)Whether to do upsert, insert or bulk_insert for the write operation. Use bulk_insert to load new data into a table, and there on use upsert/insert. bulk insert uses a disk based write path to scale to load large inputs without need to cache it.

Config Param: OPERATION
hoodie.datasource.write.precombine.fieldts (Optional)Field used in preCombining before actual write. When two records have the same key value, we will pick the one with the largest value for the precombine field, determined by Object.compareTo(..)

Config Param: PRECOMBINE_FIELD
hoodie.combine.before.insertfalse (Optional)When inserted records share same key, controls whether they should be first combined (i.e de-duplicated) before writing to storage.

Config Param: COMBINE_BEFORE_INSERT
hoodie.datasource.write.insert.drop.duplicatesfalse (Optional)If set to true, records from the incoming dataframe will not overwrite existing records with the same key during the write operation. This config is deprecated as of 0.14.0. Please use hoodie.datasource.insert.dup.policy instead.

Config Param: INSERT_DROP_DUPS
hoodie.bulkinsert.sort.modeNONE (Optional)org.apache.hudi.execution.bulkinsert.BulkInsertSortMode: Modes for sorting records during bulk insert.
  • NONE(default): No sorting. Fastest and matches spark.write.parquet() in number of files and overhead.
  • GLOBAL_SORT: This ensures best file sizes, with lowest memory overhead at cost of sorting.
  • PARTITION_SORT: Strikes a balance by only sorting within a Spark RDD partition, still keeping the memory overhead of writing low. File sizing is not as good as GLOBAL_SORT.
  • PARTITION_PATH_REPARTITION: This ensures that the data for a single physical partition in the table is written by the same Spark executor. This should only be used when input data is evenly distributed across different partition paths. If data is skewed (most records are intended for a handful of partition paths among all) then this can cause an imbalance among Spark executors.
  • PARTITION_PATH_REPARTITION_AND_SORT: This ensures that the data for a single physical partition in the table is written by the same Spark executor. This should only be used when input data is evenly distributed across different partition paths. Compared to PARTITION_PATH_REPARTITION, this sort mode does an additional step of sorting the records based on the partition path within a single Spark partition, given that data for multiple physical partitions can be sent to the same Spark partition and executor. If data is skewed (most records are intended for a handful of partition paths among all) then this can cause an imbalance among Spark executors.

Config Param: BULK_INSERT_SORT_MODE
hoodie.bootstrap.base.pathN/A (Required)Applicable only when operation type is bootstrap. Base path of the dataset that needs to be bootstrapped as a Hudi table

Config Param: BASE_PATH
Since Version: 0.6.0
hoodie.bootstrap.mode.selectororg.apache.hudi.client.bootstrap.selector.MetadataOnlyBootstrapModeSelector (Optional)Selects the mode in which each file/partition in the bootstrapped dataset gets bootstrapped
Possible values:
  • org.apache.hudi.client.bootstrap.selector.MetadataOnlyBootstrapModeSelector: In this mode, the full record data is not copied into Hudi therefore it avoids full cost of rewriting the dataset. Instead, 'skeleton' files containing just the corresponding metadata columns are added to the Hudi table. Hudi relies on the data in the original table and will face data-loss or corruption if files in the original table location are deleted or modified.
  • org.apache.hudi.client.bootstrap.selector.FullRecordBootstrapModeSelector: In this mode, the full record data is copied into hudi and metadata columns are added. A full record bootstrap is functionally equivalent to a bulk-insert. After a full record bootstrap, Hudi will function properly even if the original table is modified or deleted.
  • org.apache.hudi.client.bootstrap.selector.BootstrapRegexModeSelector: A bootstrap selector which employs bootstrap mode by specified partitions.

Config Param: MODE_SELECTOR_CLASS_NAME
Since Version: 0.6.0
hoodie.datasource.write.partitions.to.deleteN/A (Required)Applicable only when operation type is delete_partition. Comma separated list of partitions to delete. Allows use of wildcard *

Config Param: PARTITIONS_TO_DELETE

Flink based configs:

Config NameDefaultDescription
write.operationupsert (Optional)The write operation, that this write should do

Config Param: OPERATION
precombine.fieldts (Optional)Field used in preCombining before actual write. When two records have the same key value, we will pick the one with the largest value for the precombine field, determined by Object.compareTo(..)

Config Param: PRECOMBINE_FIELD
write.precombinefalse (Optional)Flag to indicate whether to drop duplicates before insert/upsert. By default these cases will accept duplicates, to gain extra performance: 1) insert operation; 2) upsert for MOR table, the MOR table deduplicate on reading

Config Param: PRE_COMBINE
write.bulk_insert.sort_inputtrue (Optional)Whether to sort the inputs by specific fields for bulk insert tasks, default true

Config Param: WRITE_BULK_INSERT_SORT_INPUT
write.bulk_insert.sort_input.by_record_keyfalse (Optional)Whether to sort the inputs by record keys for bulk insert tasks, default false

Config Param: WRITE_BULK_INSERT_SORT_INPUT_BY_RECORD_KEY

Writing path

The following is an inside look on the Hudi write path and the sequence of events that occur during a write.

  1. Deduping
    1. First your input records may have duplicate keys within the same batch and duplicates need to be combined or reduced by key.
  2. Index Lookup
    1. Next, an index lookup is performed to try and match the input records to identify which file groups they belong to.
  3. File Sizing
    1. Then, based on the average size of previous commits, Hudi will make a plan to add enough records to a small file to get it close to the configured maximum limit.
  4. Partitioning
    1. We now arrive at partitioning where we decide what file groups certain updates and inserts will be placed in or if new file groups will be created
  5. Write I/O
    1. Now we actually do the write operations which is either creating a new base file, appending to the log file, or versioning an existing base file.
  6. Update Index
    1. Now that the write is performed, we will go back and update the index.
  7. Commit
    1. Finally we commit all of these changes atomically. (A callback notification is exposed)
  8. Clean (if needed)
    1. Following the commit, cleaning is invoked if needed.
  9. Compaction
    1. If you are using MOR tables, compaction will either run inline, or be scheduled asynchronously
  10. Archive
    1. Lastly, we perform an archival step which moves old timeline items to an archive folder.